How To Change Startup Logo In Windows 10

For further personalization, you tin alter the boot logo in Windows to anything you lot want. Follow these steps to add a custom boot logo in Windows.

By default, Windows 10 shows the modern Windows logo on the boot logo. Generally, the new logo sits on meridian of pure blackness background and looks pretty smashing all the while being minimal and not burning our eyes in dark environments. But, if you got bored with the default Windows logo on the boot screen, y'all tin add your own custom logo to the boot screen.

To do that, all you have to do is bespeak Windows 10 to the paradigm of your choice, and you are done. And so, without farther ado, let me prove you the steps to change the boot logo in Windows 10.

Before Adding Custom Kick Logo:

Before making any changes, make certain you lot know and follow the below list.

• Important: Create a total backup or a rescue deejay before making any changes to the Windows kick logo. This is because, if anything goes wrong, you volition not able to kick back into Windows. That'south where the fill-in or rescue disk comes handy.
• Windows should be running in UEFI way, not Legacy BIOS. You can easily check if Windows is running on UEFI or Legacy BIOS.
• If Windows is running on UEFI, brand sure the Secure Kick feature is disabled. When Secure Boot is enabled in UEFI, y'all cannot modify the boot logo.
• You cannot ready GIFs or transparent images equally the new boot logo.
• Accept the prototype you want to gear up as the boot logo gear up and available. The epitome tin be no bigger than 300px 10 300px. The size is not a strict requirement.
• Y'all need administrative privileges to change the Windows kick logo.
• This guide is just applicable to Windows 10. It might not work in Windows 8 or vii (I take not tested it).

Once you are certain of everything in the above list, follow the next section.

Step-by-Step Guide to Alter Boot Logo in Windows 10

Over again, make sure you did a total Windows fill-in or have a rescue deejay before following the below steps.

1. Since Windows has no options to change the boot time logo, we are going to use a tertiary-party costless and open-source tool chosen HackBGRT. So, download this software, open the ZIP file, and excerpt the folder in information technology to your desktop.

2. At present, open the extracted folder, right-click on the "setup.exe" file and select the "Run as administrator" option.

3. The to a higher place action will launch the application's command-line tool. Hither, printing the i central on your keyboard.

iv. As presently as you press the key, the programme's config file will be opened in the Notepad. Out of the box, the awarding's settings are configured properly. So, just close the Notepad by clicking on the "Ten" icon on the top-correct corner.

5. One time you close the Notepad, the HackBGRT will open the Pigment application with its own default kicking logo. Here, click on the "Paste" drib-downwardly button and select the "Paste from" option.

6. Now, find the image you want to fix as the new Windows boot logo, select information technology, and click on the "Open" button.

A quick tip: Since the kicking logo doesn't support transparent images, alter the background color of your transparent image to black before adding it to the Paint application.

7. This action will add the image to the Paint awarding. If needed, resize the paradigm past clicking on the "Resize" push.

8. Once you are done, select the "File → Relieve" option to save the file. Later on saving, shut the Paint application.

nine. As before long as you shut the application, yous are done with the HackBGRT installation. You can now close information technology too.

That is it. From at present on, whenever you kick into Windows, you volition run into your new custom kick logo instead of the default Windows logo.

Restore Original Boot Logo

If y'all want to restore the original boot logo, you lot can do that using the same awarding. But follow the beneath steps.

ane. Get-go, open the HackBGRT folder, right-click on the "setup.exe" file and select the "Run as ambassador" selection.

2. Since the application is already installed in your organisation, you will see additional options.

three. To completely remove HackBGRT and restore the original boot logo, press r. If you want to disable the application and restore the original kicking logo, press d. In my case, I want to fully remove it. Then, I pressed r.

4. As before long every bit yous printing the fundamental, HackBGRT will restore the original boot logo.

Just reboot the system and you volition see the original Windows boot logo.

That is all. It is that unproblematic to change the Windows kick logo or add a custom boot logo. If you are stuck or need some assist, annotate beneath and I will endeavor to help as much as possible.

Source: https://windowsloop.com/change-boot-logo-windows-10/

Posted by: caricoevelf1974.blogspot.com

Share this post