How To Clean The Remote Control Logitech Harmony

Otto asked: How do I clean the keys on a Logitech Harmony 1? How tin can I open up the Logitech Harmony One remote control so that I can make clean around the keys that are stuck with jelly?

With their abiding use, it is non uncommon for the buttons on the remote control to go viscous with dirt, dust and food debris. The Logitech Harmony One is delicate and can easily become damaged if opened. We recommend that y'all clean the outside as well as possible. If further cleaning is required, contact a professional person to have it serviced.

While there are sites that offering instructions on dismantling the remote for cleaning, we have found this to be an unsuccessful cleaning routine. Unlike other remotes, this remote is fragile and was not designed to be taken apart. While some may have been able to put it back together, it oftentimes results in the screen not functioning, and information technology is as well very difficult to re-attach the rubber grip without it looking horrible. Non only will taking the remote apart void any warranty, it will probable damage the device.

Yous Will Demand:

• Rubbing alcohol
• Cotton swabs
• Lint-free cloth
• Toothpicks

Steps to Clean the Remote:

1. First, remove the batteries from the remote and set them to the side. We don't desire any power running through the device while cleaning.
2. Nearly gunk builds up around the buttons and in the seam between the ii halves of the remote, then we'll tackle that commencement.
3. Take a toothpick and carefully scrape the edges effectually the buttons and forth the seam to remove as much dirt and dust build upwards as possible.
4. For sticky areas or really dirty areas, rubbing alcohol can be used.
5. Dip a cotton swab in the rubbing alcohol and remove any excess liquid.
6. Apply the clammy cotton swab to wipe around the buttons and along the seam. Switch to a fresh cotton swab as needed.
7. Clean the dorsum of the remote the same fashion, using a cloth instead of a swab if preferred.
8. One time all of the clay is removed, use a lint-gratis fabric to wipe down the entire case.
9. Avert adding moisture to the entire instance as information technology can seep inside and crusade damage.
10. Brush away any grit or pieces of dirt that were removed from the buttons and wipe away any build upwards from the plastic.
11. Apply the lint-free fabric to clean the screen too.
12. Ensure there is no moisture in the remote from the rubbing alcohol earlier reinstalling the batteries.
13. Once finished, reinstall the batteries and relish your clean remote.

Was This Guide Helpful?

Reader Interactions

Source: https://www.howtocleanstuff.net/how-to-open-and-clean-a-harmony-one-remote-control/#:~:text=Dip%20a%20cotton%20swab%20in,of%20a%20swab%20if%20preferred.

Posted by: caricoevelf1974.blogspot.com

Share this post